This is how I make spaghetti straps. I don't use a loop turner or a straw or anything like that, just a safety pin.
I start with a bias strip, for these pictured I used a 1" wide bias strip. The length should be somewhat longer than you need.
Fold the strip in half with right sides together. Stitch about 1/3 of the way from the raw edge making sure you keep the same distance all the way down.
Then make a little slit toward 1 end, be careful not to cut your stitches. Use a safety pin as shown.
Just pull it through completely.
Then trim off the end and that's it. Don't press them though.
I start with a bias strip, for these pictured I used a 1" wide bias strip. The length should be somewhat longer than you need.
Fold the strip in half with right sides together. Stitch about 1/3 of the way from the raw edge making sure you keep the same distance all the way down.
Then make a little slit toward 1 end, be careful not to cut your stitches. Use a safety pin as shown.
Then insert the safety pin into the opening. You might have to help it along at first, but then it will move along just fine.
Then trim off the end and that's it. Don't press them though.
